Very similar to our standard model “VSI” both mechanical part and in the support and aesthetic part, the VSI USB HI-RESOLUTION is different from the standard model because it uses a 3.2 megapixel camera and a powerful light source with 6000K led.
   These two quality allow to the user to inspect wide zones at an optimaum distance from the object, make a hasty and quick evaluation of the live images and zoom on the particular that needs major attentions and investigations without mechanical movements or the focud continue control.
   All this is possible thanks to the graphic interface of VIDEO VIEW light software that points out a preview window from where it is possible to control easily the zooming.
   Thanks to the high sensitivity and to the high pixel number of the television camera, the zoomed image will be of high quality and it will be easy for the operator also inexpert to appreciate every little flaws on the whole image moving the selection in the preview window.
   Unfortunately yet today in many production offices, where the quality requests a particular attention, the control is performed from skilled workers with “good eyes” and above all, equipped "with their dear and venerated lens!"
   The endowment VIDEO VIEW light software can perform acquisitions, comparisons, images archiving and perform good quality films. The possible measurements are the linear ones through a axles couple that can be rotated and aligned with the image particular to measure.
   In spite of VIDEO VIEW light is at the first level of our software, it is equipped with many functions whose the most important is that to relate automatically any magnification factor (zoom) to a specific performed optic calibration.
   This particular function has been yet much appreciated from the users that use this new device, in fact the difficulties to obtain exact measurements in video with very low magnification are known. With VIDEO VIEW software it is so possible to make quick measures also with objectives not selectable mechanically; in order to have performed only an optic calibration on any magnification factor.
   For major requirements the VIDEO VIEW basic software is available that offers the possibility to make also measures of angles, rays, diameters, polygons measures, overlapping of an image or of a CAD drawing in transparency on the live image, etc.

VSI USB HI-RESOLUTION system	VISION WITH OPTIC ZOOM		VISION WITH OPTIC ZOOM + DIGITAL ZOOM
	MIN	MAX	MIN	MAX
Field of view	48x35 mm	8x6mm	48x35 mm	8x6 mm
Working distance	210 mm	22 mm	210 mm	22 mm
Magnification	5X	35X	20X	140X

USB 3,2 Megapixel camera

Maximum resolution: 2048x1536 px @ 10fps

In the under showed images we point out as with the VSI USB HI-RESOLUTION it is possible to check very little and depth particulars, and the particulars detail in the zoomed images is always of optimum quality.

   For people that intend to work with a device very similar to VSI USB-HI RESOLUTION but with major precision and speed in the performing checks and measures, VSI-K and VSI-HK USB HI-RESOLUTION are available.
   The use on these devices of a zoom objective with a mechanical preselection of the magnification and the possibility (only for the VSI-HK) to tilt also the video head, besides to have a stronger structure, make the two systems very performing and interesting their quality -price ratio in the range available on the market.

NOTE For further information see also:
VSI-K / VSI-HK

ZOOM	Magnification	Field of view
STEP 1	23X	11,8x8,9mm
STEP 2	30X	9,1x6,8mm
STEP 3	39X	7,1x5,3mm
STEP 4	48X	5,7x4,3mm
STEP 5	60X	4,6x3,4mm
STEP 6	70X	3,9x2,9mm
STEP 7	85X	3,2x2,4mm
STEP 8	100X	2,7x2,0mm
DIGITAL ZOOM	Max 400X	2,7x2,0mm

---

"VIS"
Video-optical group with microfocus slide, to be mounted on our or your stands

Recommended if you wish a continuous adjusting of the magnification and
of the focusing distance.

VIS 10349 VIDEO-OPTICAL GROUP colour DIGITAL ZOOM 1/3", complete of: - zoom type "B" objective with incorporated cold light annular lighting system with an high luminous intensity (SPT OVT 000045) - 1/3" CSC895 colour microcamera, high resolution (SPT PAC 000581) - microfocus slide (SPT SOL 000006) - alimentation set (SPT OVT 000482) VIS 10350 As VIS 10349, but without cold light annular lighting system. VIS 10266 VIDEO-OPTICAL GROUP colour 250D2 1/3", complete of: - zoom type "B" objective with incorporated cold light annular lighting system with an high luminous intensity and polarizing filter (SPT OVT 000046) - 1/3" 250D2 colour microcamera, high resolution (SPT WAT 000684) - microfocus slide (SPT SOL 000006) - alimentation set (SPT OVT 000482) VIS 10037 As VIS 10266, but without cold light annular lighting system and polarizing filter. VIS 10267 VIDEO-OPTICAL GROUP 902H B&W, complete of: - zoom type "B" objective with incorporated cold light annular lighting system with an high luminous intensity and polarizing filter (SPT OVT 000046) - 1/2" 902H B&W microcamera, high resolution (SPT SIC 000022) - microfocus slide (SPT SOL 000006) - alimentation set (SPT OVT 000482) VIS 10046 As VIS 10267, but without cold light annular lighting system and polarizing filter. VIS 10423 VIDEO-OPTICAL GROUP USB HI-RESOLUTION 3.2Mpx, complete of: - zoom type "B" objective with incorporated cold light annular lighting system with an high luminous intensity (SPT OVT 000045) - 1/2" USB 3.2Mpx camera, 2048x1536 px resolution (SPT IMA 000674) - microfocus slide (SPT SOL 000006) - alimentation set (SPT OVT 000482) - VIDEO VIEW light software (VVL 10394) VIS 10424 As VIS 10423, but without cold light annular lighting system.

---

"VIM"
Video-optical group without slide and lighting system,
to be mounted on our or your stands

Recommended if you do not need a continuous adjusting of the focusing
and when the part to examine is well illuminated.

VIM 10305 VIDEO-OPTICAL GROUP 250D2 COL, complete of: - zoom type "B" optical group for magnifications between 5X and 45X, working distance 410-35 mm and field of view 55-6.2 mm (SPT OVT 000044) - microcamera 250D2 COL 1/3", high resolution and sensibility (SPT WAT 000684) - alimentation set (SPT OVT 000482) VIM 10022 VIDEO-OPTICAL GROUP 902H B&W, complete of: - zoom type "B" optical group for magnifications between 6X and 60X, working distance 470-35 mm and field of view 48-4.7 mm (SPT OVT 000044) - high resolution and sensibility B&W 1/2" microcamera (SPT SIC 000022) - alimentation set (SPT OVT 000482) VIM 10425 VIDEO-OPTICAL GROUP USB HI-RESOLUTION 3.2Mpx, complete of: - zoom type "B" optical group for magnifications between 5X and 140X, working distance 210-22 mm and field of view 48-8 mm (SPT OVT 000044) - 1/2" USB 3.2Mpx camera, 2048x1536 px resolution (SPT IMA 000674) - alimentation set (SPT OVT 000482) - VIDEO VIEW light software (VVL 10394)

WITH REGARD OF MAGNIFICATION...

Digital Zoom system	VISION WITH OPTIC ZOOM		VISION WITH OPTIC ZOOM + DIGITAL ZOOM
	MIN	MAX	MIN	MAX
Field of view	80x60mm	8x6mm	20x15mm	2x1.5mm
Working distance	600mm	28mm	600mm	28mm
Magnification	3.5X	35X	13.5X	135X

USB HI-RESOLUTION system	VISION WITH OPTIC ZOOM		VISION WITH OPTIC ZOOM + DIGITAL ZOOM
	MIN	MAX	MIN	MAX
Field of view	48x35 mm	8x6mm	48x35 mm	8x6 mm
Working distance	210 mm	22 mm	210 mm	22 mm
Magnification	5X	35X	20X	140X

STAND ARM

VIDEO MACRO ARM: VIS / VIM + STAND ARM

STAND ARM (code SPT LIN 000054) Articulated stand, double arm (length 16 cm each), hydraulic block and magnetic base for systems: - VIS, with microfocus slide and illumination system. - VIM, without microfocus slide and illumination system.

	Cold light Arms: Illuminator with two semi-rigid arms, high luminous intensity cold light working on 12V and low consumption. Arranged of magnetic connection to be easily positioned. Technical data: Power: 12V; Absorption: 40 mA Arms length: 37 mm; Weight: 130 g code SPT OVT 000369
	MAGNETIC STAND-UP Couple of magnetic 90° angulars, they allow to keep perfectly lined up and perpendicular to the objective of the video system very thin or difficult to handle objects (i.e. cross sections of metal laminae, sheets of paper, plastic, etc). MAGNETIC STAND-UP 25 Dimensions: 25x25x15mm code SPT OVT 000489 MAGNETIC STAND-UP 50 Dimensions: 50x50x15mm code SPT OVT 000490 MAGNETIC STAND-UP 70 Dimensions: 70x70x75mm code SPT OVT 000491
	MAGNETIC MINI-CHUCK This accessory is very useful when you want to inspect and to measure with video systems small tools like drills - cutters, etc. with diameters from 1,5 and 30 mm. The little chuck is equipped with dividing notches of 5° up to 360° and it can be manually turned for the inspection of the surfaces of the tools, if used with the Magnetic Stand-Up 70 and a viewer (like our SLIM 4 x5") you will have at disposal a kit of extraordinary practicality for the control and measure of profiles in many applications. code SPT OVT 000494