Peak Optics

contactshipcall

Shopping Cart  [more]

Your cart is empty.

VCR Series Videomicroscopes (Video Check Roll)

VCR Series Videomicroscopes (Video Check Roll)

The "VCR" series of videomicroscopes is characterized by a high video-optical and mechanical quality; they are robust, completely in aluminium and their compactness and handiness make them unique in all kinds of different uses.
They are easy to carry (they can be held in one hand), they are linkable to a laptop or a PC, they work at a low voltage (5-12VDC) and they are perfect to be used directly in the production.
All VCRs can magnify the surface of an object equally well between 25 and 2350 times (with reference to a 14" TV/monitor) with the same video quality and, thanks to an exclusive magnetic system, the 12 available objectives can be quickly interchanged. All VCRs have a powerful annular or coaxial light source, which makes these appliances completely autonomous, without need of cumbersome and expensive external lighting equipment.
Thanks to the base structure, the VCRs can be placed both on flat and roll surfaces, in particular on cylinders with minimum diameters of 60 mm or 115mm (depending on the stand and the lighting system used).
All models can be equipped with a magnetic base to make them perfectly stable on curved and compatible metallic surfaces.
We manufacture different types of VCR, each of which has been designed to solve a particular requirement in the various professions, other models are being studied, so we suggest you to contact us if you do not find what you are looking for.

PRESENTLY THE VCR SERIES CAN BE DIVIDED INTO THREE BIG CATEGORIES:

1. Videomicroscopes for inspection, control, acquiring, comparing and archiving of images of plane and curved surfaces through connection to PC or laptop. This devices can take measurements on X and Y axis (further all more common measurements) if supported by adequate software.

(VCR-SL / VCR-P / VCR-CX / VCR-CXP)

2. Videomicroscopes for inspection and measuring on X-Y-Z axis with micrometrical control of semiautomatic focusing.

(VCR-ZL / VCR-ZL P / VCR-ZL CX / VCR-ZL CXP)

3. Motorized videomicroscopes with steps of 1 micron for measurings on X-Y-Z axis with automatic and semiautomatic focusing with 2 micron precision at 1500X on measuring of "Z" axe.

(VCR-ZS / VCR-ZP / VCR-Z CX / VCR-Z CXP)

VCR for measurements only on X-Y axis

VCR for measurements on X-Y-Z axis



VCR-Z Slim
(code VCR-ZS 10224)

Completely motorized, with manual, half-automatic and automatic focusing, the VCR-ZS is a control system which allows microshiftings with step of 1 µm.
The built-in led annular lighting is at variable-intensity. The optic system is interchangeable with magnetic mount; objectives from 30X to 2350X are available.
It's supplied with software of measurement and automatic focusing, it's ready to be connected to Desktop or Laptop and it's possible to make precise measurements on "X-Y-Z" axis with a 2 µm accuracy on "Z" axis
(at 1500 magnifications).


VCR-Z PRO
(code VCR-ZP 10207)

As VCR-Z Slim but arranged with a stand equipped of an exclusive mechanical system which allows microshiftings up to 10 mm on "X" and "Y" axis, keeping the perfect sharpness of the images also at very considerable magnifications.
It has a lighting system with annular cold light of 12V high luminous intensity and with the possibility to change the source angle of the illumination.
Together with a Desktop or Laptop is possible to make precise measurements on "X-Y" axis and with the accuracy of 2 µm
(at 1500 magnification) on "z" axis.
It's delivered complete of external USB2.0 interface, software of measurement, comparison and automatic and half-automatic focusing.

  
VCR-Z CX
(code VCR-Z CX 10231)

Completely motorized, with manual, half-automatic and automatic focusing, the VCR-Z CX has a control system which allows microshiftings at 1 µm steps.
The coaxial lighting allows to use objectives of the VCR series from 200X to 2350X and comprises a "X-Y" mechanical stage with microshiftings of 10x10mm.
In outfit it's supplied also with a stand for the annular lighting which allows to use the whole range of VCR objectives
(30X - 2350X).
The VCR-Z CX's coaxial lighting system is suggested for the check and measurement of flat and curved metallic surfaces on "X-Y-Z" axis and in particular for the measurement of cracks or the depth of engravings on cylinders in the graphic field.
It's provided complete of external USB2.0 interface for the connection to Desktop or Laptop, while the software VideoKLite allows the vision, measurement, comparison and archive of the images, besides the focusing system management.

  
VCR-Z CX PRO
(code VCR-Z CXP 10232)

It's a system equal to the VCR-Z CX, but, differently, it has got also a high precision stand with mechanical stage X-Y; the kind of lighting in outfit, besides the coaxial one, comprises a professional annular one, which foresees the possibility to vary the angle of the lighting source in 14 different positions.
This lighting system has been designed to evaluate the imperfections or the asperities of the surfaces in a better way.
It's very appreciated in the graphic field for the capability to check holograms also at considerable magnifications.


VCR-ZLite
(code VCR-ZL 10187)

It's a portable videomicroscope with interchangeable objectives; it uses the same range of objectives of the VCR series (25-2350X).
It's similar to the VCR-ZSlim for the kind of use, but differently, the VCR-ZLite makes centesimal measurements on "Z" axis with manual control of the focusing.
Thanks to the help of a microshiftings' pilot mechanism and of the software, it's possible to make an accurate focusing.
Predisposed with annular light with variation of the luminous intensity.
The software in outfit "VideoKLite" makes every common measurement; besides the possibility to make film segments, it is possible to compare and store the images captured with relative measurements and comments.
The connection to Desktop or Laptop is already included in the kit in outfit.


VCR-ZLite PRO
(code VCR-ZL P 10360)

As VCR-Z Lite but with stand with an exclusive mechanical system which allows microshiftings up to 10mm on "X" and "Y" axis, maintaining the perfect sharpness of the images also at very considerable magnifications.
It has a cold light lighting system of 12V high luminous intensity with possibility to change the illumination's source angle.
Together with a Desktop or Laptop is possible to make precise measurements on "X-Y" axis and the accuracy is of 10 µm
(at 750 magnification) on "Z" axis.

  
VCR-ZLite CX
(code VCR-ZL CX 10188)

It's an optimum video control system which allows to examine and measure flat and curved surface in "X-Y-Z" axis with high precision.
Through the help of a microshiftings' pilot mechanism and of the software which manages the precise focusing, the measurements in "Z" axis have an accuracy of 0,01 mm with a 750X objective.
The lighting in outfit is coaxial and it is possible to use objectives of the VCR series from 200X to 2350X thanks to the X-Y mechanical stage with which the VCR-ZL CX is equipped.
A stand for annular lighting is supplied too and it allows to use the whole range of objectives of the VCR series
(25X-2350X).
The measuring software comprises an external USB interface too which permits and easy connection to Desktop or Laptop.

  
VCR-ZLite CX PRO
(code VCR-ZL CX PRO 10371)

This system is equal to the VCR-ZL CX but, differently, has also a professional base with stage X-Y with a particular annular lighting system, which foresees the possibility to change the illumination's source angle in 14 different positions.
This lighting system has been designed to evaluate the imperfections or the asperities of the surfaces in a better way.
It's very appreciated in the graphic field for its capability to examine holograms also at very considerable magnifications.


VCR Speed Light
(code VCR-SL 10208)

It's the most compact videomicroscope of the VCR series, easy to use, strong, useful in a wide range of employments for the products' quality check.
It uses every objective of the VCR series and can magnify from 25X to 2350X
(referred to a 14" monitor).
It doesn't need external lighting sources, works at 5V and can be supplied with a 2Mpx CCD or 5Mpx CMOS USB2.0 camera.


VCR PROFESSIONAL
(code VCR-P 10176)

The VCR-P is a "miniaturized" video device amongst the most appreciated and exclusive in nowadays' market; it's able to examine and check over flat and curved surfaces of any material and disposes of a wide choice of objectives comprised between 25X and 2350X (each one with magnetic mount).
It's equipped of a stand with a high precision stage X-Y with microshiftings up to 10 mm on both axis which allows to view with impeccable sharpness the flowing of the images also at high magnifications.
The built-in cold light lighting system is of the annular professional kind at high luminous intensity and variable at continuous scale.
The chance to vary the source angle of the beam light in 14 different positions, allows to highlight very well also the smallest asperities and conformations of the surfaces under examination.
Very appreciated in the graphic field where is very useful for the examination and check of the holograms' printings.
It's provided with the 320X objective and it's ready to be connected to Desktop or Laptop through its 2Mpx CCD or 5Mpx CMOS USB2.0 camera.

  
VCR-CX
(code VCR-CX 10310)

It's a video device for micrography; thanks to the coaxial light lighting system equipped, it's very good to be employed in the examination and checking of metallic surfaces to find cracks and imperfections.
It's equipped with a mechanical stage X-Y for microshiftings up to 10 mm and uses objectives of the VCR series from 200X to 2350X.
The stand with annular lighting in outfit allows to use the VCR-CX also when the coaxial light isn't the best idea to inspect some surfaces
(ex. plastic, paper, etc.).
In the annular light system is possible to use every objective of the VCR series between 25X and 2350X.
Its 2Mpx CCD or 5Mpx CMOS USB2.0 camera allows the connection to Desktop or Laptop, while a software
(Video View) manages the vision, acquisition, comparison, archive, measuring of images and film segments.
The VCR-CX is very appreciated also in the graphic sector to examine printing cylinders, and in particular the anilox ones.

  
VCR-CX PRO
(code VCR-CXP 10285)

This system is similar to the VCR-CX but, differently, is equipped also of a stand with professional mechanical stage X-Y with a particular lighting system of annular type which foresees the possibility to vary the source angle of the light in 14 different positions.
This lighting system has been designed to evaluate the imperfections or the asperities of the surfaces under examination in a better way.
In the graphic field is very appreciated for the possibility to check holograms also at considerable magnifications.


VCR-INFRARED
(code VIR 10050)

It is supplied with a support and a solid aluminium base, with the possibility of focusing adjustment with precision. It also includes infrared annular beam (980 nm) and high resolution B&W microcamera.
The optic system is of interchangeable kind with a magnetic mount; 24X to 1880X objectives are available
(field of view 11,0x8,7mm / 0,15x0,11mm).

EXAMPLES OF APPLICATIONS
Click on the images to enlarge them




Print screen
(50X)




Print point
(200X)




Print screen
(200X)




Flexographic cliché
(25X)




Anilox cylinder
(1550X)




Engraved plate
for offset printing (320X)




Section of milk's
carton (320X)




Section of business-card
(475X)




Section of rubberized cloth
(printing cliché) (75X)




Razor blade edge
(750X)





Rim of the razor blade
examined with
coaxial light (750X)




Watch mechanism
(100X)





Notes' cardboard
(50X)




Notes' cardboard
(320X)




White paper photocopy
with traces of toner (320X)

  • Manufactured by: Lippolis


E-mail for Price

Copyright © 2017 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices subject to change without notice.**

PIA Member

For your convenience, we accept these credit cards:
Credit Card Logos