peakoptics.com

contactcallship

Reticles

The below reticles are used by 7X magnifiers (1975, 1976, 1998, 1999 & 2015) and 10X (1983, 2004 & 2028)


The tolerance for reticles 0.05mm for the total measuring range of the reticle

Click on the images to enlarge
Black standard White standard

SCALES AVAILABLE FOR ITEMS: 2008-2034-2054 series

Standard (mm)
Tools (mm)
Printing (inch)

Part Number Magnification Value of Tolerance Total Measuring Range Scale Divisions
1975-STD 7x 0.05 mm 20 mm 0.1 mm
1983-STD 10x 0.05 mm 20 mm 0.1 mm
2016-STD 15x 0.025 mm 14 mm 0.1 mm
2037 30x 0.01 mm 5 mm 0.1 mm
2055 20x 0.01 mm 4 mm 0.1 mm
2044 8x to 16x 0.02 mm 8 mm 0.1 mm
2066 10x to 20x 0.02 mm 6 mm 0.1 mm
2008-25 25x 0.005 mm 2 mm 0.05 mm
2008-50 50x 0.005 mm 1 mm 0.02 mm
2008-75 75x 0.005 mm 0.5 mm 0.01 mm
2008-100 100x 0.001 mm 0.5 mm 0.005 mm
2034-20 20x 0.005 mm 3 mm 0.1 mm
2034-40 40x 0.005 mm 1.5 mm 0.05 mm
2034-60 60x 0.005 mm 1 mm 0.02 mm
2034-100 100x 0.005 mm 0.8 mm 0.01 mm
2034-150 150x 0.001 mm 0.7 mm 0.005 mm
2034-200 200x 0.001 mm 0.4 mm 0.002 mm
2034-300 300x 0.001 mm 0.3 mm 0.001 mm

Compatible Magnifiers 1975, 1998, 1999, 2015 1983, 2028 2016, 2016-L
Description 7X 26 mm Dia. 10X 35 mm Dia. 15X 26 mm Dia. Reticle
Standard with scale markings
Zero Center 0 to 10mm (1/2mm divisions)
Crosshair at zero
OPT-P1975RETSTD
("Standard")
OPT-P1983RETSTD
("Standard")
OPT-P2016RETSTD
("Standard")
Protractor 0-90 (1 intervals)
Concentric Circles 1/2-10mm (1/2mm intervals)
0 to 10mm Scale (0.1mm divisions)
0 to 0.4in. (0.005in. division), 0.025 in Squares
OPT-P1975RET1
(P.S. No. 1)
OPT-P1983RET1
(P.S. No. 1)
OPT-P2016RET1
(P.S. No. 1)
0 to 0.5in. Scale (0.005in. divisions)
Circles mm and in., Angles
Concentric Circles 0-10mm (1/2mm intervals)
OPT-P1975RET2
(P.S. No. 2)
OPT-P1983RET2
(P.S. No. 2)
OPT-P2016RET2
(P.S. No. 2)
Thickness Lines 0.02- 0.16mm (0.01mm intervals) OPT-P1975RET3
(P.S. No. 3)
OPT-P1983RET3
(P.S. No. 3)
N/A
0 to 10mm Scale (0.1mm divisions)
10mm by 5mm Squares
Circles 0.05mm to 1.0mm diameter
OPT-P1975RET4
(P.S. No. 4)
OPT-P1983RET4
(P.S. No. 4)
N/A
0-0.5in. Scale(0.005in. divisions)
Concentric Circles 1/16- 3/8in. (1/32in. divisions)
OPT-P1975RET5
(P.S. No. 5)
OPT-P1983RET5
(P.S. No. 5)
N/A
0-90 (5 divisions)
Concentric Circles 1/2mm- 10mm (1/2mm intervals)
0 - 10mm Scale, 0 to 0.3in. Scale, 0 to 3/8in. Scale
OPT-P1975RET6
(P.S. No. 6)
OPT-P1983RET6
(P.S. No. 6)
N/A
0 to 10mm (0.1mm division), 0.5mm
Squares Circles 0.1mm - 2.5mm diameter
OPT-P1975RET7
(P.S. No. 7)
OPT-P1983RET7
(P.S. No. 7)
N/A
0-20mm Scale (0.1mm divisions) OPT-P1975RET8
(P.S. No. 8)
OPT-P1983RET8
(P.S. No. 8)
OPT-P2016RET8
(P.S. No. 8)
0-180 Scale 0-90 Scale (1 divisions)
0-10mm Concentric Circles (1/2mm intervals)
OPT-P1975RET9
(P.S. No. 9)
OPT-P1983RET9
(P.S. No. 9)
N/A
Screw Threads 0.25mm - 1mm (9 threads) OPT-P1975RET10 (P.S. No. 10 OPT-P1983RET10 (P.S. No. 10) N/A
Threads per inch 8 to 50 (9 threads) OPT-P1975RET11
(P.S. No. 11)
OPT-P1983RET11
(P.S. No. 11)
N/A
0-90 Scale (1 divisions)
0-0.5in. Scale (0.005in. divisions)
OPT-P1975RET12
(P.S. No. 12)
OPT-P1983RET12
(P.S. No. 12)
N/A
Horizontal scale 0 to 0.08" in 0.005" divisions OPT-P1975RET13
(P.S. No. 13)
OPT-P1983RET13
(P.S. No. 13)
OPT-P2016RET13
(P.S. No. 13)
Horizontal scale inch/metric
Zero center crosshair
Inch 0 to 0.4" in 0.005" divisions
Metric 0 to 10 mm in 0.1 mm divisions
OPT-P1975RET14
(P.S. No. 14)
OPT-P1983RET14
(P.S. No. 14)
N/A
Blank
No scales or grid
OPT-P1975RETB
(Blank)
OPT-1983RETB
(Blank)
N/A
N/A = Not Available

There are no products to list in this category.
Copyright © 2014 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices subject to change without notice.**



For your convenience, we accept these credit cards: