Peak Optics

contactshipcallwe ship worldwide

Shopping Cart  [more]

Your cart is empty.

Peak 1990-4 4X and 1990-7 7X Anastigmatic Loupe

Peak 1990-4 4X and 1990-7 7X Anastigmatic Loupe

The 1990-4 Loupe with 4X magnifying power is specially designed to enable observers to simultaneously inspect the whole picture area of the standard micro-film size (i.e. 32mm x 45mm) or flat objects less than 58mm in diameter. The image observed through the loupe is critically sharp from the center to the edge of the image field, because of the careful optical correction of the loupe for the astigmatism and the curvature of the field as well as aberrations concerning the image of the central image. Ordinary magnifiers are corrected only for the central image. In this respect, this loupe is quite similar to anastigmatic photographic lenses, and is manufactured with the same care and precision.

One point which distinguishes this loupe from photo-lenses is that the position of the effective pupil of the loupe has been placed as far as 25mm above the upper pole of the loupe; so that an observer can inspect the whole image field by merely moving his eyeball, without moving his face. This is an extremely advantageous feature for a micro-filmer, because it enables him to inspect a number of negatives very speedily and comfortably.

The Peak 1990-7 Anastigmatic Loupe with 7X has taken over the optical system of Peak Anastigmatic Loupe 4X, improving the magnifying power as high as 7 times. You can use Anastigmatic Loupe 4X to check the whole picture area of film. In case only a part of the object is to be inspected with a higher magnifying power, Peak Anastigmatic Loupe 7X is the best for the job.

A cross hair reticle metric scale is provided.

Magnifiers with reticles are not supplied with certification certificates.
Certification if required must be sent to a certification lab.
Buyer is responsible for the source and cost.

1990-4
Magnification: 4X
Field of View: 58 mm
Effective Aperture: 30 mm
Minimum Scale Division: 0.1 mm
Scale Length: 54 mm
Working Distance: 54 mm
Size: 73 x 77 mm
Net Weight: 272 g

Click to Download 1990-4 Instructions Insert

1990-7
Magnification: 7X
Field of View: 41 mm
Effective Aperture: 22 mm
Minimum Scale Division: 0.1 mm
Scale Length: 36 mm
Working Distance: 36 mm
Size: 55 x 53 mm
Net Weight: 103 g

Replacement cross reticle and parts available, see below.

Quantity Discount:
5% off all orders that total $1,010.00 or more on items of the same model. (Accessories and Reticles not included)
For items that are priced over $1,010.00 two or more of the same item must be ordered to receive the discount.
DISCOUNT TABLE SHOWN AT BOTTOM OF PAGE

Note:
1990-7 7X Anastigmatic Loupe (OPT-P19907) currently delayed delivery.
Confirmed lead time will be advised.

  • Models: OPT-P19904, OPT-P19904LENSCAP, OPT-P19904BC, OPT-P19904RETH, OPT-P19904RET, OPT-P19904RETCLEAR, OPT-P19907, OPT-P19907RET & OPT-P19907RETCLEAR
  • Manufactured by: Peak Optics/Japan

Please Choose:
Check the box for the product, then add to the cart.

Click For Quantity Discount Table 1990-4 Anastigmatic Loupe - Includes Loupe and Case





1990-4 Replacement Parts







1990-4 Reticles






1990-7 Reticles






Add to Cart:
Copyright © 2024 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices, images and specifications subject to change without notice.**

PIA Member    D & B Verified

For your convenience, we accept these credit cards:
Credit Card Logos